Neck/Keychain Knives

I enjoy doing a variety of neck knives. I do many 'neckers with pouch sheaths though, it seems, many more
with Kydex and magnetic sheaths. My magnetic neck knives are great for display and quick access/release. Each knife
 comes with an open faced magnetic sheath. The sheaths are framed in leather to keep all edges safely away from
 the wearer. Knives are held in place by rare earth magnets embedded in the sheaths themselves (approx.7 lb.
rating per magnet). With these you can proudly display your knife and when needed a quick downward pull
releases the knife in an instant. To replace the knife in it's sheath just put the blade towards the open panel
of the sheath and they will immediately "lock" together.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

"Damascus Spur" Keychain/Neck Knife

This Spur keychain knife is made from a solid piece of 3 1/2" long, 350+ layer high carbon damascus steel (approx. 1/8" thick).
The single sided, double chisel ground blade is well suited for both pull/draw & sweeping cuts (logo is on the flat side).
The ring handle with its finger cut-outs and stabilizing "spur" allow for multiple grips for both blade edges.
These Spurs come with a molded Kydex sheath to provide complete security and easy access.
Removing the ring and adding a cord/chain also allows this to become a handy neck knife. 
Price, with Kydex sheath: $175.00 (one still available)
 

"Neck Thorn" Skeleton Necker

This little skeleton necker has a "cut" profile and forged edge of 1/8" thick 1084 high carbon steel, fully-quenched. The
knife is 3 7/8" overall with a 1 3/4" cutting edge and has my "antiqued/boiled-mustard" finish to protect the surface
and add a cool look to the piece. The knife comes with a Kydex neck sheath and black ball-chain.
Price for a similar piece, with Kydex sheath: $100.00
 

Ball-bearing Damascus & Ivory Necker

This neck knife is forged from 52100 ball-bearing canister damascus with 1084 powder. The knife is 5" with a
2 3/8" cutting edge. The handle scales are "end-cut" Walrus Ivory with rough ends and champhered top and
bottom. The pins are stainless steel and the open pommel is finished with a bronze ball fob. The knife
comes with a "windowed" black Kydex neck sheath with black ball chain.
Price for a similar piece, with Kydex sheath: $375.00
 

"Stubby" Neck Knife

This  4 3/4" "Stubby" Neck knife has a blade of "frontier" damascus with a low top bevel and
 a 2" cutting edge. The guard is brushed aluminum. The handle is Desert Ironwood with a throat
 of Red Jasper stone with a black spacer and a stainless steel pin. The "open-faced" magnetic
 neck sheath has a Shark skin overlay.
Price for a similar piece, with leather sheath: $275.00
 

Flared Magnetic Hawkbill

This necker has a 2-2 1/2" hawkbill blade of 350 layer damascus with a brushed aluminum guard,
a throat of Red Apple Coral, black spacer and a handle of stabilized Chechan Burl wood. The handle
 is finished off with a stainless steel pin. The "open-faced" magnetic neck sheath has a Stingray overlay.
Price for a similar piece, with leather sheath: $250.00

 

Neck Dagger in Black Lip Pearl

This Neck Dagger is 6" overall with a 3" dagger blade for 400+ layer "twist" damascus with file
 work highlights, Black Lip Mother of Pearl scales and 14 kt gold pins. The "open-faced"
magnetic neck sheath has a Stingray overlay.
Price for a similar piece, with leather sheath: $550.00

 

"Little Whisker" Neck Knife

This Necker is done in the same fashion as my basic forged models. The knife itself is high carbon "twist"
damascus with file work on the spine. The knife is 6" overall with a  2 5/8" cutting edge. The handle
of the knife is wrapped in black Pig Skin with tan stitching. The stitching was left unlined to see
the damascus underneath. The knife comes with a tooled leather magnetic neck sheath
(open-faced, only the very tip is covered) stitched to match the knife.
Price for a similar piece, with leather sheath: $240.00

 

Chainsaw Damascus Titan

This 6" Titan (3" blade/ 3" handle) is made from Chainsaw/Canister damascus. The handle
scales are Desert Ironwood with stainless steel handle bolts. The tooled leather pouch
sheath shown has an Alligator skin inlay.
Price for a similar piece, with leather sheath: $300.00