Camp Style Knives

This is the section for knives that will tackle any chore be it a cutting contest or
a contest with the great outdoors. Big knives are fun!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Ham-Hands...Beast" Chopper/Camp Knife

This big chopper is an off-shoot of our original "Ham-Hands" model... and then some. This knife has a
9 3/4" edge-quenched blade of 336 layer damascus forged from 5160 & 15N20 high carbon steels in
a "random cut" pattern. The guard and threaded pommel are 4140 steel with and antiqued/mustard
finish. The handle is a large piece of Sambar Stag with black spacers on each end. The knife
has an overall length of 14 1/2" and comes with a tooled leather post sheath.
Price, with leather sheath: $950.00

"Big Burlap" Camp Knife

This camp chopper has a 9 3/4" blade forged from JD5160, flat ground with a convex edge and a satin finish.
The overall length of this knife is just over 15". The guard on this piece is carbon steel. The handle is Burlap
Mycarta (by L.R. "Butch" Harner) with a green Micarta spacer and a stainless steel pin and lanyard
liner. The knife comes with a border tooled leather blade sheath with snap and loop.
Price for a similar piece, with leather sheath: $600.00

"Big Stag" Camp Knife

This Camp knife has a 10 1/2" long hand-rubbed blade of 5160 spring steel, 15 5/8" overall. The
knife has a guard and a half of nickle-silver with a matching pommel. The handle is Sambar Stag
with a double throat of African Red Jasper stone with a black spacer. The fully carved leather
blade sheath depicts DaVinci's "Dragon & Lion" sketch in full color.
Price for a similar piece, with leather sheath: $900.00

"Basic Needs" Camp Knife

This no-nonsense chopper is forged from W1 steel. The blade is 10" with an etched/satin finish, forge
marked flats and a rounded spine. The double brass guard has a black spacer on top of a Cocobola
handle with a brass pin and lanyard liner. This knife is 15 1/2" overall and comes with a border
tooled leather blade sheath with a snap and loop.
Price for a similar piece, with leather sheath: $550.00

"Humpback" Camp Knife

"Ham-Hands" Chopper/Camp Knife

This big chopper has a 10" blade of satin finished 5160 spring steel with a beveled spine and is about
13/4" at it's widest point (from spine to edge). The contoured guard is stippled and cold blued 1018
carbon steel. The handle is Cocobola wood with a maroon Micarta spacer and stainless steel pins
and lanyard liner. This piece is 15" overall and comes with a tooled leather blade sheath.
Price for a similar piece, with sheath: $650.00

Flame Ebony Camp Cutter

This camp knife has a 9 1/8" blade of high carbon "frontier" damascus steel that's just over a 1/4" at it's
 thickest with a low top bevel on the spine to compliment the flat grind and full distal taper. Overall
length is 14 1/2". The handle is stabilized Flame Ebony wood with a carbon steel guard, stainless
 steel pin and staggered nickle-silver spacers. The knife comes with a tooled leather blade sheath
 with Cape Buffalo inlays and tan stitching, matching the tan streaks in the handle.
Price for a similar piece, with leather sheath: $1,000.00

"Pack Knife" in Ironwood

Our pack knife is large enough for camp chores but, light enough to throw in your pack for hiking.
This pack knife has a 9 1/8" hand-rubbed blade of 5160 spring steel, 3/16" at it's thickest. The
contoured guard is nickle-silver. The handle is Desert Ironwood Burl with a throat of Malachite
 stone, black/green spacers and a stainless steel pin. The knife's overall length is 14 3/8".
The leather post/belt sheath has a "floral-vines" carving.
Price for a similar piece, with leather sheath: $500.00

"Crooked-Back" Camp Knife

I love our standard Crook-back belt knife model so much that I decided to extend that pattern to a large
blade. This camp knife has a 9 3/4" "crook-back" blade forged from 5160JD high carbon steel
with a hand-rubbed finish. The contoured guard is nickle-silver. The handle is high contrast
Desert Ironwood with a throat of Kingman Turquoise stone, black spacer and stainless
steel pin. The knife is 15" overall and comes with a tooled leather blade sheath.
Price for a similar piece, with leather sheath: $600.00

"Camp Bowie" in Curly Maple

This full tang, heavy cutter is made from JD5160 high carbon spring steel and has a satin finish. The
blade is approx. 9 3/4" with just under a 15" overall length. The guard, handle bolts and lanyard
liner are all brass. The handle itself is stabilized Curly Maple wood with black liners. The
knife shown has a tooled leather "rig" sheath with a Barred Owl carving.
Price for a similar piece, with leather sheath: $700.00

Full Tang Bola-Ironwood

This Bola knife has an 8" blade of 5160 spring steel with a hand-rubbed finish, 13" total length. The knife has
a slotted, single guard of stainless steel with stainless steel handle bolts and lanyard. The handle is Desert Ironwood
 with black liners. This knife comes with a tooled leather pouch sheath.
Price for a similar piece, with leather sheath: $600.00

"Ironwood Riot" Pack Knife

This pack knife has a 9 1/8" blade forged from 5160 spring steel, 3/16" at it's thickest point. The has a hand-rubbed
finish and enough ricasso to choke up on the blade. The contoured guard and threaded pommel are nickle-
silver. The handle is staggered/stacked blocks of Desert Ironwood (both burl and high contrast)
with black spacers in between each layer. The knife is 14 3/8" overall and comes
with a tooled leather blade sheath with "Autumn Maple Leaves" carving.
Price for a similar piece, with leather sheath: $600.00